
PureTec TFF System
The SciLog PureTec is a tangential flow filtration (TFF system) that monitors and adjusts the trans-membrane pressure to optimize product yield.
PureTec® systems are used for protein purification, concentration, diafiltration, as well as harvesting and clarification, and are available with a choice of pump heads and motor speeds suited for your application providing flow-rates up to 2,000 ml/min.
The PureTec® system comes with a set of 3 SciPres® pressure sensors, an 8.1 kg balance, a 500 mL vessel with magnetic mixer and a start-up kit including tubing and fittings for your bioprocessing needs.
The PureTec® TFF system has automatic documentation and alarm /pump stop settings allowing the user to focus on other tasks while the system is running. Programmable end points ensure the system stops operation when a diafiltration or a user defined concentration is reached.
The pump rate or pressure modes of the PureTec® system can be increased or decreased while running without stopping the action of the pump.

FilterTec NFF System
The SciLog FilterTec™ automated laboratory-scale normal flow filtration (NFF) system can optimize filtration parameters, maximize filter throughput and can be used as a filter evaluation tool.
The FilterTec™ connects up to three pressure sensors to automatically monitor, adjust and document pre-filter back pressure and permeate flow rate to optimize filtration speed, maximize filter throughput, and scientifically evaluate or compare different filters. The walk-away system is fully programmable providing peace of mind for the user, whilst they concentrate on other tasks, providing significant cost savings.
The FilterTec™ automated normal flow filtration systems increases efficiency in the following applications: media and buffer filtration, bioreactor harvest, final sterile and viral filtration, chromatography column loading and filter evaluation and comparison.

LabTec Single-Use Automated Dispensing System
The SciLog® LabTec® automated dispensing system is an easy-to-use, one touch, fluid dispensing system, dispensing by volume, weight or weight ratio. Once the dispense volume is set up, the user simply needs to press a button to initiate the high precision, high accuracy dispense ranging from milliliters to liters.
The LabTec® system can also perform in-line filter sterilization when combined with an in-line SciPres® pressure sensor, the system is able to sense filter fouling.
LabTec® systems are used in laboratory sample preparation and dilution. Also, often used in small production runs for final fills for vials, bottles, bags and other containers.

ChemTec Single-Use Automated Metering System
The SciLog ChemTec™ system provides an automated solution for a variety of chemical and biological processes, scaling from Lab to full production.
With a choice of pump heads to suit each application including: Peristaltic, Piston, Mag Coupled Gear Driven. The SciLog ChemTec™ is a fully automated walk away system, which is programmable to auto cut off to avoid over pressure and offers real-time data capture to monitor your process from beginning to end.
With no need for additional controllers or monitoring, it helps to ensure your process is simple and cost effective.